VS CODE

KiCad 8.0

OrcaSlicer

AMMY

sudo systemctl stop server.service

sudo systemctl start server.service

install.py

setup_weeder.sh

sudo nano /etc/systemd/system/server.service

server.service

journalctl -u server.service -f

To fix this, set the udev rules using the commands below, unplugging DepthAI and then plugging it back into USB afterwards. echo 'SUBSYSTEM==“usb”, ATTRS{idVendor}==“03e7”, MODE=“0666”' | sudo tee /etc/udev/rules.d/80-movidius.rules sudo udevadm control –reload-rules && sudo udevadm trigger